Why asphalt shingle roofing is the local favorite
Shingles are lighter than tile, which suits the framing on older homes. They work on a wide range of roof pitches, cost less to install than many alternatives, and are straightforward to repair if a section is damaged. Architectural shingles add a thicker, layered look that gives depth to a long ranch roofline or a newer home with multiple gables.
The trade-off is heat. Shingles here spend months under intense sun, and a hot attic adds stress from below. The way a shingle roof is built has a big effect on how well it handles those conditions. If you are weighing the decision, this overview of what goes into a new asphalt shingle roof is a helpful read.
Our asphalt shingle installation process
We remove the old roofing down to the deck, including any extra layers. Damaged wood is replaced and the deck is fastened securely. Then we install underlayment over the entire surface, with drip edge along eaves and rakes and metal in valleys.
Starter shingles go down first along the edges so the first course seals and resists wind. Each course is laid straight and nailed according to the manufacturer's instructions. Step flashing is installed at walls, and new boots go around vent pipes. Ridge caps finish the top, often over a continuous ridge vent. If only a section of your roof needs work, our roof repair service may be enough.
Helping shingles handle valley heat
Attic heat is one of the main reasons shingles age early in Turlock. Without good airflow, the deck can get much hotter than the outdoor air, and shingles dry out from below. Pairing a new roof with balanced roof ventilation helps them last.
Color also matters. Lighter and reflective shingles absorb less heat, and some product lines are built specifically to meet California's cool roof standards. We bring samples so you can see the colors in daylight against your siding and trim.
- Keep gutters and valleys clear of dust and leaves
- Trim branches that rub or shade one slope heavily
- Check for lifted tabs after windy storms
- Replace cracked pipe boots promptly
Shingle roofing on older Turlock homes
Many older houses near downtown were built with plank decking instead of plywood sheets. Gaps between planks can be too wide for modern shingles, so we sometimes add a layer of plywood over the planks before installing the new roof. We will let you know if your home needs that, and why, before the job begins.
Shingle roof cost factors
- Roof size, pitch and complexity
- Shingle line and color
- Layers removed and deck repairs
- Ventilation and flashing work
Every estimate is written and includes disposal.
Questions worth asking before a shingle re-roof
When you compare bids, ask each contractor whether they will tear off all existing layers, how they will handle soft decking, what underlayment they plan to use, whether new drip edge and pipe boots are included, and how attic ventilation will be addressed. The answers matter more than the brand name on the bundle, because installation quality is what decides how long the roof lasts in this heat.
Algae, dust and shingle appearance
North-facing slopes that stay damp through fog season sometimes develop dark streaks. Shingle lines with algae-resistant granules help keep the roof looking clean, and gentle rinsing removes valley dust without harming the surface.
Asphalt shingle roofing FAQs
What is the difference between three-tab and architectural shingles?
Three-tab shingles are thinner and flat. Architectural shingles are layered, heavier and give a more dimensional look, and they generally handle wind better.
Can you install shingles in summer?
Yes. We start early, when it is cooler, and take care not to scuff soft shingles in the afternoon heat.
Will a lighter shingle make a difference?
Lighter colors reflect more sunlight, which can lower attic temperatures somewhat.
Do I need a permit for a new shingle roof?
Yes, a re-roof typically requires a permit. We handle it for you.
Ready for new asphalt shingles?
Call (209) 762-9069 for a free asphalt roofing estimate.